1. Punching
Packs a mean punch with a reversible punch block capable of 5mm and
6mm dia holes in 5mm/6mm flat bar respectively. Now includes the 3mm
and 4mm punch block and pins
PROFILE SPECIFICATION
Max 5mm Dia in 5mm Thick material or 6mm Dia in 6mm Thick material
Max 4mm Dia in 4mm Thick material or 3mm Dia in 3mm Thick material
2. Shearing
Cuts like a hot knife through butter for all of these sizes. Note the separate blade aperture for cutting round and square bar.
PROFILE SPECIFICATION
Max 25mm x 8mm to 40mm x 6mm Flat
Max 10mm Square
Max 12mm Dia Round
3. Riveting
Produces strong authentic looking ornamental joints using cold
rivets. A useful alternative to welding when availability of welding
equipment or power is an issue.
PROFILE SPECIFICATION
Max will work with 5mm, 6mm and 3mm rivets (flat or round head)
4. Rolling
Rolls arches, curves and rings in flat and square bars by driving
steel backwards and forwards through rollers using the winding handle.
(note - be aware that the knurled drive roller can leave a "knurl"
pattern impression on the face of the steel bar being rolled)
PROFILE SPECIFICATION
Max 50mm x 6mm to 40mm x 8mm Flat
Max 16mm Square
5. Bending (single Pass)
Real power bending completed in a single pull of a lever. Bends
upto 60° angles in material sizes up to 12mm thick. Bends upto 90°
angles in material beyond 12mm and upto 16mm thick.
PROFILE SPECIFICATION
Max 25mm x 10mm to 40mm x 8mm Flat
Max 16mm Square
Max 16mm Dia Round
5+ Bending (Progressive)
An extra feature for gradual bending of even bigger sections into curves. Carried out by applying large bending power at increments along the length of a bar.
Handles a wide variety of sections including angle, T-section, square tube, square bar and channel, and even handrail profile.
PROFILE SPECIFICATION
Max 50mm x 10mm to 40mm x 8mm Flat
Max 20mm Square
Max 16mm Square (if bent diagonally)
Max 20mm Dia Round
Max 30mm x 30mm x 1.5mm (wall thickness) to 25mm x 25mm x 2mm (wall thickness) Square Tube
Max 30mm x 30mm x 3mm (thick) to 25mm x 25mm x 6mm (thick) Angle
Max 30mm x 30mm x 3mm (thick) to 25mm x 25mm x 5mm thick T-section
Max 40mm x 5mm to 25mm x 10mm Flat bar on edge
